Esker Fax Server From Field Fax issue

Answered Question
Dec 7th, 2009
User Badges:

We are deploying Esker Deliveryware Fax Server. We are on CUCM 6.1 and we have all the faxing working internally and externally. Our problem is when we recieve faxes in our email, the from field is populated with a long string of characters as follows: TA:10.100.0.6:1720,TEL:106968106968,NAME:106968106968,106968106968 [IMCEAFAX-TA+3A10.100.0.6+3A1720+2CTEL+3A106968106968+2CNAME+3A106[email protected]]


10.100.0.6 is our Call Manager Subscriber

106968 is the 6 digit internal ext associated with my fax line.

rtiintl.com is our domain.


Not sure where the rest of this info is coming from but we would like to have something in the "From" field like Esker Fax or something similar and not confusing to users.


If anyone can help with this, it would be greatly appreciated.


You can email any questions to [email protected].


Thanks,

Rich

Correct Answer by paolo bevilacqua about 7 years 5 months ago

Why you complain here and not to Esker ?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
paolo bevilacqua Fri, 12/11/2009 - 07:48
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Why you complain here and not to Esker ?

kevinrast Fri, 12/11/2009 - 07:55
User Badges:

We did complain to Esker, however they swore up and down that the problem was on the Cisco side. We have since had this issue resolved by Esker. It turned out to be a field in an XML document on the Esker server that was pulling the data.


Rich

paolo bevilacqua Fri, 12/11/2009 - 09:18
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Thank you for clarifying.


Please remember to rate useful posts with the stars below.

Actions

This Discussion

Related Content