WRVS4400Nv2 VPN Keepalive.

Answered Question
Aug 10th, 2009
User Badges:
  • Bronze, 100 points or more

Hello Cisco Community,


Have a question related to the router mentioned in the subject, and we are wondering on how to enable Keepalive and DPD


We are using the following firmware V1.00.09-ETSI, and we can not see this options under the VPN Tunnel Configuration.


Thank you!

Victor.-



Correct Answer by Te-Kai Liu about 7 years 7 months ago

WRVS4400N does not support Dead Peer Detection. Whenever the router finds the tunnel dead when there is an outgoing packet from the local to the remote subnets, it will try to reconnect the tunnel.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Te-Kai Liu Mon, 08/10/2009 - 11:02
User Badges:
  • Gold, 750 points or more

WRVS4400N does not support Dead Peer Detection. Whenever the router finds the tunnel dead when there is an outgoing packet from the local to the remote subnets, it will try to reconnect the tunnel.

Actions

This Discussion