LMS 3.0.1/ UT : AP1200 not discover on UT

Unanswered Question
Dec 8th, 2009


We don't see AP1200 on UT. We don't see the vlan where all AP1200 belong.

sh ver: 
Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(7)JA2, RELEASE SOFTWARE (fc1)
System image file is "flash:/c1200-k9w7-mx.123-7.JA2/c1200-k9w7-mx.123-7.JA2"

oid and package see doc.

How can I actrive debug for campus and ut, there is so many modules.

Thanks, Elisabeth

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Joe Clarke Tue, 12/08/2009 - 10:27

You need to be running Campus 5.0.4 or higher to get working end host acquisition on access-points.  Then, you must have the acquire end hosts on AP box checked under Campus Manager > Admin > User Tracking > Acquisition.  Your APs must also be configured for multiple VLANs.

ebezombes Tue, 12/08/2009 - 11:51

On campus 5.1.0, we can't see this option, see acquisition_ut.doc file

Joe Clarke Tue, 12/08/2009 - 12:58

You said you were using LMS 3.0.1 which includes Campus 5.0.x.  The option does exist in Campus 5.1.x, but it Campus 5.0.x, you need to add:


to NMSROOT/campus/etc/cwsi/ut.properties.

ebezombes Tue, 12/15/2009 - 11:49

When you said "Your APs must also be configured for multiple VLANs", do you think that if AP is configured with native vlan only (vlan 1) it can be why there are not discover ?

Joe Clarke Tue, 12/15/2009 - 11:55

If the APs are only configured for VLAN 1, then UT will not acquire any users on them.  You must be using trunking, and you must have multiple trunks for the Q-BRIDGE-MIB to be properly populated.


This Discussion