I have a R1 connected to WAN01 and WAN02 routers. Both WAN routers redistributing EIGRP routes from the Hub location and my R1 receving the route such as 172.16.1.0 via both WAN01 and WAN02.
I am going the change the metrics on WAN02
router bgp 65100
redistribute EIGRP 100 route-map CHANGE
route-map CHANGE permit 10
match ip address 99
set metric 2142999 100 255 1 1500
access-list 99 permit 172.16.1.0 0.0.0.255
The question is by changing the metric on WAN02, my R1 will only receive 172.16.10 from WAN01, and will only install the same route from WAN02 when my WAN01 goes down. Will changing the metric effect on the actual bandwidth and delay of the interface when the traffic is pass through WAN02 to 172.16.1.0.