Remote destination profile for Mobility connection

Unanswered Question
Dec 9th, 2009
User Badges:

In Remote destination profile for mobility connection we have [ Ingone presentation indicator ( internal calls only ) ], even when check or un-check the box I am not able to find any difference in connected line ID, please let me know what is the use of this "Ingone presentation indicator ( internal calls only )" in Remote Destination Profile.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jonathan Schulenberg Wed, 12/09/2009 - 05:59
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Presentation Indicators are when the Display information is set to Restricted. If you are not hiding calling party display information within UCM, this will not impact mobile connect.

asandborgh Wed, 12/09/2009 - 06:06
User Badges:
  • Silver, 250 points or more

Hi,


First, from the remote destination profile "help for this page"

Check the check box if you want to ignore the connected line ID presentation. Use this configuration for internal calls.


Second, From the Help for this page of a route pattern:




Connected Line ID Presentation

Cisco Unified Communications Manager uses connected line ID presentation (COLP/COLR) as a supplementary service to allow or restrict the called party phone number on a call-by-call basis.

Choose whether you want Cisco Unified Communications Manager to allow or restrict the display of the connected party phone number on the calling party phone display for this route pattern.

Choose Default if you do not want to change the connected line ID presentation. Choose Allowed if you want to display the connected party phone number. Choose Restricted if you want Cisco Unified Communications Manager to block the display of the connected party phone number.

For more information about this field, see Table 17-11 in the Connected Party Presentation and Restriction Settings section in the Cisco Unified Communications Manager System Guide.


This setting impacts the calling phone not the destination phone.  This is used mainly for PLAR or translation situations where you don't want an internal caller to know the final DN of a call - like in a hotel perhaps.


HTH,


Art

Actions

This Discussion