GBIC

Answered Question
Dec 9th, 2009

Hi Friends:

I have some doubt to find & confirm the part number of a GBIC port module. On 6509 switch we have a SFP module (WS-X6724-SFP). I want to know the part number of the GBIC port inserted to it. Whether it is a SX or LX type.

This switch is in remote location. Thats why I couldn't check physically.

Any suggestion here pls?

Thanks!!

Arun

I have this problem too.
0 votes
Correct Answer by vvasisth about 6 years 12 months ago

yup the part number will be GLC-SX-MM

Check this you will get all the information regarding the SFp connectors :-

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Chassis_Installation/Cat6500/0bcabcon.html

regards,

Varun

Correct Answer by Jon Marshall about 6 years 12 months ago

arun.patro wrote:

Thanks Jon,

So the exact part number will be GLC-SX-MM?

Regds.

Arun

Yes that should do it, this is the standard connector for multimode fibre connection.

Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Giuseppe Larosa Wed, 12/09/2009 - 03:26

Hello Arun,

that is a linecard and SFP can be different on each port

use show interface status on the righmost column it will give you for each port the type of GBIC installed

example:

T-TO-CRN-SF-E-1>sh int status

Port         Name               Status       Vlan       Duplex  Speed Type
Gi3/1        Link -> XX-CRN- connected    10           full   1000 1000BaseSX
Gi3/2        XX-SM-C-3   connected    trunk        full   1000 1000BaseSX
Gi3/3        XX-SM-C-1g1 connected    trunk        full   1000 1000BaseSX

Hope to help

Giuseppe

vvasisth Wed, 12/09/2009 - 03:29

"Show interface " will give you this result as well as "sh idprom int "

example :-

sup720_52#sh idprom int gi9/4 detail 
Hexadecimal dump of TRANSCEIVER SEPROM :

       SEEPROM contents (hex) size 128:
         0x00: 03 04 07 00 00 00 01 00 00 00 00 01 0D 00 00 00
         0x10: 37 1B 00 00 43 49 53 43 4F 2D 46 49 4E 49 53 41
         0x20: 52 20 20 20 00 00 90 65 46 54 52 4A 38 35 31 39
         0x30: 50 31 42 4E 4C 2D 43 36 41 20 20 20 03 52 00 74
         0x40: 00 1A 00 00 46 4E 53 31 31 33 36 31 39 30 31 20
         0x50: 20 20 20 20 30 37 30 39 30 37 20 20 58 80 01 87
         0x60: 00 00 02 D6 ED 72 04 68 64 6B 3D 7B FB 59 4B 3C
         0x70: 18 60 AA 00 00 00 00 00 00 00 00 00 2C 3B 6C 49


Transceiver Serial EEPROM Contents:
Common block:
Identifier        : SFP [0x03]
Connector         : LC [0x07]

Transceiver
Speed            : Unspecified [0x00]
Media            : Unspecified [0x00]
Technology       : Unspecified [0x00]
Link Length      : [0x01]
GE Comp Codes    : Unspecified [0x00]
SONET Comp Codes : Unspecified [0x00]
Encoding          : 8B10B [0x01]
BR, Nominal       : 13x100 MHz [0x0D]
Length(9u)        : Transceiver does not support single mode fibre,
                    or the length information must be determined from
                    the transceiver technology. [0x00]
Length(50u)       : Transceiver does not support 50 micron multi-mode
fibre,
                    or the length information must be determined from
                    the transceiver technology. [0x37]
Length(62.5u)     : Transceiver does not support 62.5 micron multi-mode
fibre,
                    or the length information must be determined from
                    the transceiver technology. [0x1B]
Length(Copper)    : Transceiver does not support copper cables,
                    or the length information must be determined from
                    the transceiver technology. [0x00]
Vendor Name       : CISCO-FINISAR  
Vendor OUI        : 00.90.65
Vendor PN         : FTRJ8519P1BNL-C6
Vendor rev        : A  
CC_BASE           : 0x74

Extended ID Fields
Options           : Loss of Signal implemented
                    TX_FAULT signal implemented
                    TX_DISABLE is implemented and disables the serial
output
BR, max           : Unspecified 0%
BR, min           : Unspecified 0%
Vendor SN         : FNS11361901    
Date (yy/mm/dd)   : 07/09/07
CC_EXT            : 0x87

Vendor Specific ID Fields:

0x00: 00 00 02 D6 ED 72 04 68 64 6B 3D 7B FB 59 4B 3C
0x10: 18 60 AA 00 00 00 00 00 00 00 00 00 2C 3B 6C 49

Jon Marshall Wed, 12/09/2009 - 03:43

arun.patro wrote:

Hi Friends:

Thanks for all the quick commects.

Here I have attached the interface outputs.. Still not sure about the part number either it is GLC-SX-MM ot GLC-LX-MM

Arun

You want SX - from your interface output -

Full-duplex, 1000Mb/s, media type is SX

Jon

arun.patro Wed, 12/09/2009 - 03:47

Thanks Jon,

So the exact part number will be GLC-SX-MM?

Regds.

Arun

Correct Answer
Jon Marshall Wed, 12/09/2009 - 03:54

arun.patro wrote:

Thanks Jon,

So the exact part number will be GLC-SX-MM?

Regds.

Arun

Yes that should do it, this is the standard connector for multimode fibre connection.

Jon

Actions

This Discussion