show lwapp client config

Unanswered Question
Dec 9th, 2009
User Badges:

In old IOS LAP, the command "show lwapp client config" showed the Static configuration of a LAP. Now in the last or new IOS this command is not availbale. How I can see the static configuration in the LAP ??

New IOS:

LAP1131#show lwapp client config
% Invalid input detected at '^' marker.

Old IOS version:

LAP#show lwapp ip config 

LWAPP Static IP Configuration
IP Address         10.177.2.X
IP netmask
Default Gateway    10.177.2.X
Primary Controller 172.166.1.X

Thanks !

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
dancampb Wed, 12/09/2009 - 06:58
User Badges:
  • Cisco Employee,

What version are you running?  If its 5.2 or 6.0 the commands changed to CAPWAP (show capwap client config).


This Discussion