1131 AP site-survey functionality

Answered Question
Dec 9th, 2009
User Badges:

Hello -


I want to perform a site-survey using Airmagnet and a Cisco AIR-LAP1131AG-A-K9.   In the past I have done all my site surveys using the 1000 Series LWAPP APs.  The 1000 Series APs had a dip switch setting that I needed to alter by taking the side panel off the AP.   This worked great.


With the 1131 AP I am wondering if the same option exists for when in LWAPP mode or if I need to convert it to autonomous and then just use the default "tsunami" SSID for my site survey process.


Please advise.


Regards

Chuck

Correct Answer by Leo Laohoo about 7 years 5 months ago

Hi Chuck,


Please convert the LAP to autonomous for better result.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Leo Laohoo Fri, 12/11/2009 - 15:07
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Hi Chuck,


Please convert the LAP to autonomous for better result.

c.fuller Mon, 12/14/2009 - 06:24
User Badges:

Yes, this is exactly what I did.  I converted the 1131s to autonomous, enabled the radios and configured a basic SSID, to broadcast in beacons.  I can now use Airmagnet site surveyor to perform site surveys.


Chuck

Actions

This Discussion