Routing exception with VPN Client 4/Win

Unanswered Question
Dec 9th, 2009
User Badges:

I am connecting with VPN Client 4 to a customers internal network. However the VPN client re-routes all traffic

to the customers network. This makes it impossible to connecting to other customers networks through

OpenVPN. It is even impossible to get to local machines. Is there some reasonable workaround?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jan.nielsen Wed, 12/09/2009 - 10:45
User Badges:
  • Gold, 750 points or more

Solution called split-tunneling, and you configure it on the Cisco VPN gateway, where you can define what networks should be encrypted instead of everything which is default. Be aware that this has some security risks, since you could be bridging traffic between two otherwise not-connected network through your pc.

andreasjung03 Wed, 12/09/2009 - 11:10
User Badges:

Split-tunneling requires action to be taken by the customers IT or can this be done on my system without any configuration changes on the customer side?

Actions

This Discussion