Sup720-10G ASICs

Daniel Smith · ‎12-09-2009

Interested to know what the command is that will show the ASIC

to port mapping on the 6500? I want to assess the impact of QoS changes on some ports, and how those changes

will get propagated to other ports on the same ASIC.

Jon Marshall · ‎12-09-2009

dasmith wrote:

Interested to know what the command is that will show the ASIC

to port mapping on the 6500? I want to assess the impact of QoS changes on some ports, and how those changes

will get propagated to other ports on the same ASIC.

Don't know the command but you can use the release notes for this, just go to the module you are interested in and it lists the port groups/port ranges -

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/release/notes/OL_4164.html

Jon

Edison Ortiz · ‎12-09-2009

Router> show interfaces capabilities module 6

FastEthernet6/1

Dot1x: yes

Model: WS-X6248-RJ-45

Type: 10/100BaseTX

Speed: 10,100,auto

Duplex: half,full

Trunk encap. type: 802.1Q,ISL

Trunk mode: on,off,desirable,nonegotiate

Channel: yes

Broadcast suppression: percentage(0-100)

Flowcontrol: rx-(off,on),tx-(none)

Membership: static

Fast Start: yes

QOS scheduling: rx-(1q4t), tx-(2q2t)

CoS rewrite: yes

ToS rewrite: yes

Inline power: no

SPAN: source/destination

UDLD yes

Link Debounce: yes

Link Debounce Time: no

Ports on ASIC: 1-12

Port-Security: yes

Router# 


http://www.cisco.com/en/US/docs/ios/interface/command/reference/ir_s4.html#wp1017617

Regards

Edison