Adding a second SIP peer in sip-ua section in CME

Unanswered Question
Dec 10th, 2009

I currently have one SIP trunking peer and in the section sip-ua the configuration looks like this:



sip-ua

no remote-party-id

retry invite 2

retry register 10

timers connect 100

sip-server ipv4:218.62.1.195:5060



I want to test a second SIP trunking provider which requires authentication. 

But I don't want to affect the existing SIP service.  Would adding the two lines

get me what I want?  That is - I want authentication being sent only when

traffic is destined for 192.168.2.2  Thank-you.



sip-ua

no remote-party-id

authentication username 9515551212 password xxxx realm 192.168.2.2

retry invite 2

retry register 10

timers connect 100

sip-server ipv4:208.70.13.195:5060

sip-server ipv4:192.168.2.2:5060

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Thu, 12/10/2009 - 09:37

Currently, authentication to only a single remote SIP is supported.

There is no way around that (major overight by cisco).

Actions

This Discussion