Solved: Help with CUE script editor

insomniacgames_nc · ‎12-10-2009

Hi,

I am trying to modify the an aa script to Call Redirect a call to a general voice mailbox. I can get it to work with one digit using Dial-by-Extension, but can't get aa to redirect a call if the digits dialed are 5555

I also can't get trace information from a show trace buffer long | include EXECUTING_STEP

I am using a Get Call Contact Info call to (hopefully) place the dialed digits into a variable called NumberDialed.

I then use a IF (NumberDialed == XferExtndigits5) then where XferExtnDigits5 = "5555" (string)

Call Redirect (...) the call redirect works using one digit

any ideas or how can I get trace information?

Thanks,

Carlos

paolo bevilacqua · ‎12-14-2009

You are welcome.

Please remember to rate useful posts clicking on the stars below.

View solution in original post

insomniacgames_nc · ‎12-11-2009

I solved my own problem...

the 5555 was never being checked as the script was checking for a "5" prior as a shortcut.

I still would appreciate any help in debugging cue 7.0.1 scripts.

Are there any tools to step into the scripts?

Carlos

paolo bevilacqua · ‎12-12-2009

Yes, the "interactive debug mode" as explained in the CUE documentation.

insomniacgames_nc · ‎12-14-2009

Turns out that I was not getting trace output since the atrace.log file is disabled by default in AIM.

I also had to "trace ccn ManagerAppl" to log the executing step trace info.

Thanks for pointing me in the right direction.

Carlos

paolo bevilacqua · ‎12-14-2009

You are welcome.

Please remember to rate useful posts clicking on the stars below.