Can Not Create T3 Multilink on 7613

Answered Question
Dec 10th, 2009
User Badges:

I currently have two T3 multilinked on 7206vxr and need to move this multilink over to a new chasis (Cisco 7613, IOS 12.2(33) SRC4).

When I try to create the multilink on the 7613 it does not work. I'ev created multilinks before and have never had any issues. Attached is the show tech. Does anyone know why it doesn't work? Any assistance would be greatly appreicated.

Attachment: 
Correct Answer by Giuseppe Larosa about 7 years 4 months ago

Hello David,

>> just so that I understand you correctly. I will have to break the bundle and create seperate /30 connections for each WAN link?


yes this is your only option


Hope to help

Giuseppe

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Giuseppe Larosa Fri, 12/11/2009 - 00:58
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello David,

you have

5    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA


see restrictions for distributed multilink in flexwan configuration guide



Distributed MLPPP is supported only for member links configured at T1/E1 or subrate T1/E1 speeds. Channelized STM-1/T3/T1 interfaces also support dMLPPP at T1/E1 or subrate T1/E1 speeds. Distributed MLPPP is not supported for member links configured at clear-channel T3/E3 or higher interface speeds.


http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/features.html#wp84027


you need to move to two or three parallel L3 links


Hope to help

Giuseppe

davidhuynh5 Fri, 12/11/2009 - 09:02
User Badges:

Hi giuslar,

just so that I understand you correctly. I will have to break the bundle and create seperate /30 connections for each WAN link?

thanks.

Correct Answer
Giuseppe Larosa Fri, 12/11/2009 - 09:29
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello David,

>> just so that I understand you correctly. I will have to break the bundle and create seperate /30 connections for each WAN link?


yes this is your only option


Hope to help

Giuseppe

davidhuynh5 Fri, 12/11/2009 - 13:15
User Badges:

As usual Guislar, thanks for your help. Please change your handle to "CiscoGod":-)

Actions

This Discussion