About Secondary Dial Tone on CME

Answered Question
Dec 11th, 2009
User Badges:

How can voice gateway provide outside dial tone to 3951 just like what cucm do?


P.S.

I have configed dial plan for 3951.


Thanks & Regards

Correct Answer by Michelle Jardim about 7 years 4 months ago

Hi,


This SIP phone on CME does not support secondary dialtone. Only SCCP phone does with the configuration below:


telephony-service

     secondary-dial digit-string


Hope this can help you.


Michelle Jardim

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
iptuser55 Fri, 12/11/2009 - 01:28
User Badges:
  • Silver, 250 points or more

in the telephony service - I think there is a commend "secondary dial tone" which you add

paolo bevilacqua Fri, 12/11/2009 - 02:34
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

The 3951 is a SIP phone and as such, not influenced by any command under telephony-service.


This said, I don't know what can be causing the problem.

Correct Answer
Michelle Jardim Fri, 12/11/2009 - 10:16
User Badges:
  • Cisco Employee,
  • Events Top Contributors,

    2013

Hi,


This SIP phone on CME does not support secondary dialtone. Only SCCP phone does with the configuration below:


telephony-service

     secondary-dial digit-string


Hope this can help you.


Michelle Jardim

markjiang Sat, 12/12/2009 - 00:24
User Badges:

Hi,Michelle,


I have tested the secondary dial tone command under telephony service.

However,it doesn't effect SIP phone.


Thanks

Actions

This Discussion