12-11-2009 08:53 AM
Im unable to use the ACE Web GUI thru HTTPS. When I point my browser to https://ipaddress I will be presented with a login page. I will then provide the login credentials and will successfully authenticated. However, after the login screen all I get is a blank page. I am using several versions of IE (ver 6, 7, 8). All of these IE Versions doesnt work.
On a side note, telnet access does work on this boxes.
Thank you
Ronnel
Solved! Go to Solution.
12-11-2009 01:12 PM
Hi,
It might be similiar to this issue. What version of code are you running?
CSCsv95366
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsv95366
If this answers your questions please mark as answered with a 5.
Thanks,
12-11-2009 01:12 PM
Hi,
It might be similiar to this issue. What version of code are you running?
CSCsv95366
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsv95366
If this answers your questions please mark as answered with a 5.
Thanks,
01-20-2010 06:48 PM
Does this apply to the ACE module as well? I have a similar issue. I don't get a blank page upon logging into https://x.x.x.x
, but I get I get what almost appears to be a status page. I have a 4710 that the web GUI works fine one.
01-21-2010 06:06 AM
Hi David,
The ACE10/20 module does not have an embedded GUI like the ACE4710. If you want to utilize a GUI for the ACE module then you will have to install the ANM software.
Here is information on ANM
http://www.cisco.com/en/US/products/ps6904/index.html
Thanks
Eric
if this answers you questions, please mark as answered and with a 5.
01-25-2010 11:33 AM
Is that a purchased/licensed piece of software? It's not really clear to me
01-25-2010 07:06 PM
Hi
01-25-2010 09:00 PM
Great info! I'll check it out.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide