Device Fault Monitoring in LMS 2.6

Answered Question
Dec 11th, 2009
User Badges:

We have a working LMS 2.6 setup in which we have implemented all the modules. In our Ciscoworks implementation we have created multiple device groups in the DFM corresponding to each site .


I want that the alerts that are generated in the DFM are viewed by the respective site admin only , in other words Site A admin should be able to see the alerts generated for the devices situated at Site A only.



Can any one suggest how this can be achieved.

Correct Answer by Joe Clarke about 7 years 5 months ago

In order to restrict device access to only certain users, you must integrate LMS with ACS.  Then, in ACS, you need to create network device groups which contain the devices on which each group of users is allowed to operate.  This white paper explains ACS integration in a little for detail:


http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Joe Clarke Sun, 12/13/2009 - 11:09
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

In order to restrict device access to only certain users, you must integrate LMS with ACS.  Then, in ACS, you need to create network device groups which contain the devices on which each group of users is allowed to operate.  This white paper explains ACS integration in a little for detail:


http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html

Actions

This Discussion