12-12-2009 04:10 AM - edited 03-06-2019 08:55 AM
Hi,
Does the command of "system mtu routing 1500" affect the trunk port only? if not, what routing port does it mean?
regards
Solved! Go to Solution.
12-12-2009 07:44 AM
Routed ports are layer-3 ports. A routed port has an IP address associated with, it is not a switch port (layer-2).
HTH
Reza
View solution in original post
12-12-2009 06:53 AM
anitachoi3 wrote:Hi,Does the command of "system mtu routing 1500" affect the trunk port only? if not, what routing port does it mean?regards
anitachoi3 wrote:
The command affects all packets routed by the switch, please see the command reference for full details -
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/command/reference/cli3.html#wp1948947
Jon
12-12-2009 07:30 AM
Grateful if the meaning of "routed port" would be advised as below sentence. Does it refer to trunk port?
"You can use the system mtu routing command to configure the MTU size on routed ports"
rdgs
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
