I have two 5K's in a VPC configuration. I'm trying to figure out how to connect the 1000v using CNA's, especially pertaining to FCOE.
Currently we have servers with a 10 gig connection to each 5K using VPC-HM. In addition to the regular traffic/control VLANs, each server port on the 5K's has it's own VLAN to VSAN mapping (5K-1 uses VLAN 100 for VSAN, 5K-2 uses VLAN 200 for VSAN). This appears to be working OK, however I would prefer that we use the VPC on the 5K's instead.
My question is, on the 5K's how do I need to configure the FCOE connection on the VPC? I know I can bind the vfc to the port-channel... but do I use a different VLAN -> VSAN on each 5K for each server? If this is the case, would this not fail the VPC consistency check? Or can I simply use the same VLAN/VSAN on each 5K for that VPC?