cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
789
Views
0
Helpful
1
Replies

UC520 with Integrated Wireless Controller - Guest WLAN?

cook-andrew
Level 1
Level 1

Hi Netpro Colleagues,

I have a question that I am trying to resolve and I'm not finding any solid information anywhere. I have a customer asking me if there is a possibility to configure a guest WLAN SSID on the UC520 while still providing the normal secure Data and Voice WLAN.

The problem is I can't find any solid information if this is possible or not. Most of the configuration guides that I have found involve using the GUI configuration tool and the screenshots only seem to show the possibility of configuring a voice and a data SSID, however I found a datasheet that seems to indicate that the UC520 can support up to 3 SSIDs.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps7293/product_data_sheet0900aecd8061fb06.html

Is this only possible via CLI? Is this possible at all?

Any help would be greatly appreciated.

Regards,

Andrew Cook

WLAN Specifications

Table 7 lists the WLAN specifications of the Cisco Unified Communications 520 Series

WLAN hardware

• 802.11b/g

• Automatic rate selection for 802.11b/g

• RP-TNC connectors for field-replaceable external antennas (antenna options for extended coverage)

• Antenna diversity

• Indoor range: 1 Mbps at 320 ft (97.54m)

• Wireless Ethernet Compatibility Alliance (WECA) interoperability

• Default antenna gain: 2.2 dBi

WLAN software

• Options to maximize throughput or maximize range

• Software-configurable transmit power

• Wireless Multimedia (WMM) certification

• Service Set Identifier (SSID) globalization

WLAN security

• 802.1X

• 802.11e

• WPA and AES (WPA2)

• EAP authentication: Cisco LEAP, PEAP, and Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST)

• Static and dynamic WEP

• Temporal Key Integrity Protocol Simple Security Network (TKIP/SSN) encryption

• MAC authentication and filter

• User database for survivable local authentication using LEAP and EAP-FAST

• Configurable limit to the number of wireless clients

• Configurable RADIUS accounting for wireless clients

• Preshared keys (PSKs)

• Workgroup Bridge Association

SSIDs and Service Set Identification List (SSIDL)

3

Wireless VLANs

3

Encrypted wireless VLANs

3

Multiple Basic SSIDs (MBSSIDs)

1

1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

Yes it is possible.

For sure, use the CLI only.

The GUI is too buggy and unrelaible for professional results.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: