12-15-2009 07:59 AM - edited 03-06-2019 08:57 AM
Message was edited by: doug lamb Thank you for everyones help and answers!
Solved! Go to Solution.
12-15-2009 08:21 AM
If you have contract and support taken from cisco for your network devices
in your network.Then your contract can tell you more about commercial aspect with cisco.
My suggestion is check out your contract with cisco for downloading a new IOS from cisco.
Hope that help
Regards
Ganesh.H
12-15-2009 08:21 AM
If you have contract and support taken from cisco for your network devices
in your network.Then your contract can tell you more about commercial aspect with cisco.
My suggestion is check out your contract with cisco for downloading a new IOS from cisco.
Hope that help
Regards
Ganesh.H
12-15-2009 08:50 AM
Hi Doug
If you want to upgrade your feature-sets on your switch (say from IP-BASE to IP-SERVICES image), then SMARTNET contract might not support it. SMARTNET contracts are more for break fixes and will allow free IOS upgrades within the same major, minor versions with the existing feature-sets.... Please have a look at the SMARTNET Q&A for understanding more about your support contract.
You need to order the following component to upgrade Standard Image to Enhanced Imange on 3560's:
CD-3560-EMI= ----> IP Services License (formerly EMI) upgrade kit for IP Base versions of the Cisco Catalyst 3560-24PS, Catalyst 3560-48PS, Catalyst 3560-24TS, Catalyst 3560-48TS, and Catalyst 3560-8PC.
Hope this Helps.. All the Best..
Raj
12-15-2009 10:56 AM
if you have a contract and cco id then download the ios from the below given link :-
regards,
Varun
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: