12-17-2009 12:10 PM - edited 03-09-2019 10:46 PM
I need some help configuring SSH on a 48 port Switch Cisco WS-C3750G-48TS that is running Cisco IOS 12.2(25) SEE2.
I have attempted to set it up, but I had no luck. If anyone can give me any assistance to this let me know.
12-17-2009 02:09 PM
Firstly, you need to have an IOS with a "k9" like "C3750-IPBASEK9-M" when you do a "sh version".
line vty 0 15
transport input ssh
line cons 0
transport input ssh
12-22-2009 12:30 PM
Hi Mike
Based on your existing IOS level (iP Base/IP services/Adv IP services) you should upgrade your switch to one of the IOS versions given below, to have SSH:
c3750-ipbasek9-mz.12.2-52.SE - min flash 16, DRAM 128
c3750-ipservicesk9-mz.12.2-52.SE - min flash 16, DRAM 128
c3750-advipservicesk9-mz.12.2-46.SE - min flash 16, DRAM 128
Once you have your IOS upgraded, define hostname, domain name, crypto rsa key, and transport input commands on the switch to have it converted to SSH..
Hope this helps.. All the best
Raj
02-15-2017 08:40 AM
Very nice thanks,
12-26-2009 02:14 AM
Hi,
In order to have ssh functionality in devices you need to have a cryptography image ios with name called K9.So you need to upgarde your ios image to have ssh funcationality.
HTH
Regards
Ganesh.H
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide