Solved: CUCM add gateway query

norm.trees · ‎12-18-2009

Hi,

I want to add a Cisco 888 gateway using MGCP in CUCM version 6.1.2.1124-1, this type of Gateway is not there to add, is there an update I can apply to CUCM to be make this Gateway available to do this?

Thanks

asandborgh · ‎12-18-2009

Norm,

Found this in a SRST document - implies support starts at 6.13

SRST 880 is natively supported by CUCM 6.13 and 7.1

http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/requirements/guide/srs43spc.html

HTH,

Art

View solution in original post

Brandon Buffin · ‎12-18-2009

According to the following link, you need a minimum of 6.1(3), 7.0(2) or 7.1(3).

http://www.cisco.com/en/US/prod/collateral/routers/ps380/qa_c67_458826.html

Hope this helps.

Brandon