12-18-2009 07:01 AM - edited 03-15-2019 08:50 PM
Hi,
I want to add a Cisco 888 gateway using MGCP in CUCM version 6.1.2.1124-1, this type of Gateway is not there to add, is there an update I can apply to CUCM to be make this Gateway available to do this?
Thanks
Solved! Go to Solution.
12-18-2009 08:02 AM
Norm,
Found this in a SRST document - implies support starts at 6.13
SRST 880 is natively supported by CUCM 6.13 and 7.1
http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/requirements/guide/srs43spc.html
HTH,
Art
12-18-2009 08:03 AM
According to the following link, you need a minimum of 6.1(3), 7.0(2) or 7.1(3).
http://www.cisco.com/en/US/prod/collateral/routers/ps380/qa_c67_458826.html
Hope this helps.
Brandon
12-18-2009 08:02 AM
Norm,
Found this in a SRST document - implies support starts at 6.13
SRST 880 is natively supported by CUCM 6.13 and 7.1
http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/requirements/guide/srs43spc.html
HTH,
Art
12-18-2009 08:32 AM
Cheers for that, looks like I will need to upgrade to 6.1.3.
Your help is much appreciated!
N.
12-18-2009 08:03 AM
According to the following link, you need a minimum of 6.1(3), 7.0(2) or 7.1(3).
http://www.cisco.com/en/US/prod/collateral/routers/ps380/qa_c67_458826.html
Hope this helps.
Brandon
12-18-2009 08:33 AM
Thanks for your help here, looks like I will need to upgrade to 6.1.3.
Much appreciated!
N.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: