12-18-2009 11:13 AM - edited 03-19-2019 12:10 AM
Hello All,
So i had an issue with the "Authentication load failure" on my 7941. I loaded an 8.5.2 code into both call managers but the 7941 was still trying to download the old code I had in there, which was 8.5.3. Now I did a factory reset but the phone comes up as upgrading and it download the term file then it shows a bullseye and reloads itself, it does this constantly? How can I fix this and how can I get current phones to download the new code in call manage rather then the old one that was in there? Is the problem that the term41.default file is not on the call manager? thanks
Jason
Solved! Go to Solution.
12-18-2009 11:31 AM
Did you specify the firmware version from CUCM? If not, plase go to CUCM Admin > Device > Device Settings > Device Defaults to specify the firmware version (8.5.2).
Hope this helps!
Michael
12-18-2009 11:31 AM
Did you specify the firmware version from CUCM? If not, plase go to CUCM Admin > Device > Device Settings > Device Defaults to specify the firmware version (8.5.2).
Hope this helps!
Michael
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide