Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
12047
Views
0
Helpful
11
Replies

RV042 with Shrew Soft on Win7(64)

pgordon
Level 1
Level 1

‎12-18-2009 09:39 PM

I was never able to get QuickVPN to work with my RV042 on our new computers, which use Windows 7 (64-bit).  I found some positive comments about Shrew Soft VPN Client, but I can't get it to work either.  All computers are using Windows 7 Professional.  Here's the rest:

Firmware 1.3.12.19-tm
Firewall disabled
Multicast Pass Through enabled
IKE with preshared key
VPN Pass Through enabled

Shrew Version 2.1.5

Shrew hangs on "bringing up tunnel," right after preshared key configured.
The debug log states that IKE packet gets sent with no response, and negotiation times out.

I'm out of ideas. Please help.

Paul

Labels:
0 Helpful
11 Replies 11

desumoyo-san
Level 1
Level 1

‎12-19-2009 10:02 AM

Hi,

Configure your RV042 like this screen : http://omploader.org/vMzFhMA

Import on Shrew Soft this file : http://omploader.org/vMzFhMQ/Cisco%20Small%20Business%20RV042 and change configuration for your network (Subnet, Server adress and preshared key)

0 Helpful

pgordon
Level 1
Level 1
In response to desumoyo-san

‎12-19-2009 10:40 PM

Success.  Thank you.

0 Helpful

David Hornstein
Level 7
Level 7
In response to pgordon

‎02-06-2010 10:34 PM

Hi guys,

Check out this posting as well.  Well worth a look at using the native IPSec client in windows 7.  Just wish I had a powerful enough PC that would accept  windows 7 so i could validate the procedure in the posting below;

https://supportforums.cisco.com/docs/DOC-10273

Message was edited by: Cindy Toy

0 Helpful

MaestroMroj
Level 1
Level 1
In response to desumoyo-san

‎06-06-2013 05:02 PM

Links are dead. Could you reupload it please?

0 Helpful

cindy toy
Level 7
Level 7
In response to MaestroMroj

‎06-06-2013 06:20 PM

Hi aaa bbb,

The link has been updated.

Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport

Regards, Cindy If my response answered your question, please mark the response as answered. Thank you!
0 Helpful

BlueshiftTek
Level 1
Level 1
In response to desumoyo-san

‎02-20-2014 12:38 PM

If these were updated it would be great; trying to setup ShrewSoft and RV042 without much success.

0 Helpful

mpyhala
Level 7
Level 7
In response to BlueshiftTek

‎02-20-2014 04:10 PM

Robin,

You are unable to open the link? It is working fine for me.

- Marty

0 Helpful

BlueshiftTek
Level 1
Level 1
In response to mpyhala

‎02-20-2014 04:15 PM

I'm going to the 'omploader' links provided by 'desumoyo-san' and they don't link to what they're supposed to.

0 Helpful

mpyhala
Level 7
Level 7
In response to BlueshiftTek

‎02-20-2014 04:21 PM

Robin,

Sorry, I thought you meant https://supportforums.cisco.com/docs/DOC-10273

- Marty

0 Helpful

desumoyo-san
Level 1
Level 1

‎02-07-2010 12:42 AM

Many thank, that work fine :)

0 Helpful

claytonhicks
Level 1
Level 1

‎06-20-2013 02:53 PM

Links are dead again. Is there a way to make these permanent?

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents