Rate Limiting a 6509 Port

Unanswered Question
Dec 19th, 2009
User Badges:

Hi,


I have a 6509 running CatOS v8.2 (I know it's old and am hopefully upgading in Jan  ) and I want to limit one of the 100Mbps ports to rate limit input to 60Mbps.


What's the best way to do this, and what is the command(s).


Thanks for any help.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
BlueyVIII Sat, 12/19/2009 - 09:56
User Badges:

Thanks....do you know if there's a similar doc for CatOS??


Or, does anyone know the best command for me to use?

Jon Marshall Sat, 12/19/2009 - 10:06
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

BlueyVIII wrote:


Thanks....do you know if there's a similar doc for CatOS??


Or, does anyone know the best command for me to use?


Have a look at this doc and come back if you have further questions -


http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/configuration/guide/qos.html#wp1021642


Jon

BlueyVIII Sat, 12/19/2009 - 14:42
User Badges:

Thanks Jon....


I think the policer config I need is  :-


set qos policer aggregate WSUS_SERVER rate 51200 burst 61440 drop


However, It's not clear from the document how I apply this to the port??


Any advice greatfully received..

Jon Marshall Sat, 12/19/2009 - 14:57
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

BlueyVIII wrote:


Thanks Jon....


I think the policer config I need is  :-


set qos policer aggregate WSUS_SERVER rate 51200 burst 61440 drop


However, It's not clear from the document how I apply this to the port??


Any advice greatfully received..


You need to use the policer together with an acl, here is an example -


http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801c8c4b.shtml#catos


Jon

Actions

This Discussion