Issue with inbound calls identification (CLI) on Bri Interfaces

Unanswered Question
Dec 22nd, 2009

Hi ,

Before explain my problem, let me say thanks for your help.

I have a customer with a 2821 router ( 3 BRI interfaces) connecting to cisco callmanager  , the problem is that when the customer receive an inbound call they see on the display " anonymous , i attach you the config and the debug isdn q931,

Can you provide me a command guide or something else?

Thanks for your support

Carlos

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Tue, 12/22/2009 - 06:19

You cannot do anything about it, because the call comes as anonymous from telco:

Dec 22 10:53:02.326: ISDN BR0/1/0 Q931: RX <- SETUP pd = 8  callref = 0x53
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech 
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0x89
        Display i = 'Anonymous'
        Calling Party Number i = 0x21A0, N/A

                Plan:ISDN, Type:National
        Called Party Number i = 0xA1, '696044805'
                Plan:ISDN, Type:National
        Sending Complete

carloszzz27 Tue, 12/22/2009 - 08:34

Thanks guys and mery christmas

I suppose that but i never work with that issue.

Actions

This Discussion