ā12-22-2009 04:26 AM - edited ā03-15-2019 08:51 PM
Hi ,
Before explain my problem, let me say thanks for your help.
I have a customer with a 2821 router ( 3 BRI interfaces) connecting to cisco callmanager , the problem is that when the customer receive an inbound call they see on the display " anonymous , i attach you the config and the debug isdn q931,
Can you provide me a command guide or something else?
Thanks for your support
Carlos
ā12-22-2009 06:19 AM
You cannot do anything about it, because the call comes as anonymous from telco:
Dec 22 10:53:02.326: ISDN BR0/1/0 Q931: RX <- SETUP pd = 8 callref = 0x53
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Display i = 'Anonymous'
Calling Party Number i = 0x21A0, N/A
Plan:ISDN, Type:National
Called Party Number i = 0xA1, '696044805'
Plan:ISDN, Type:National
Sending Complete
ā12-22-2009 07:13 AM
you could ask your telco to turn cli on
ā12-22-2009 08:34 AM
Thanks guys and mery christmas
I suppose that but i never work with that issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide