Hi Bevila,

Thanks for your response. We have tested the lines with analog phone and all work fine. The following are the capture of the debug of VPM signal and it seems like the outgoing call keep trying the 4 FXO ports which I assigned for outgoing call:

*Dec 28 01:24:51.057: htsp_timer_stop3 htsp_setup_req

*Dec 28 01:24:51.061: htsp_process_event: [0/0/1, FXOLS_ONHOOK, E_HTSP_SETUP_REQ                                                                              ]fxols_onhook_setup

*Dec 28 01:24:51.061: [0/0/1] set signal state = 0xC timestamp = 0

*Dec 28 01:24:51.061: htsp_timer - 1300 msec

*Dec 28 01:24:51.313: htsp_process_event: [0/0/1, FXOLS_WAIT_DIAL_TONE, E_DSP_SI                                                                              G_1100]fxols_power_denial_detected

*Dec 28 01:24:51.313: htsp_timer2 - 1000 msec

*Dec 28 01:24:51.317: htsp_timer_stop

*Dec 28 01:24:52.313: htsp_process_event: [0/0/1, FXOLS_WAIT_DIAL_TONE, E_HTSP_E                                                                              VENT_TIMER2]fxols_power_den_disc

*Dec 28 01:24:52.313: htsp_timer_stop

*Dec 28 01:24:52.313: htsp_timer_stop2

*Dec 28 01:24:52.313: [0/0/1] set signal state = 0x4 timestamp = 0

*Dec 28 01:24:52.317: htsp_process_event: [0/0/1, FXOLS_ONHOOK, E_HTSP_RELEASE_R                                                                              EQ]fxols_onhook_release

*Dec 28 01:24:52.445: htsp_timer_stop3 htsp_setup_req

*Dec 28 01:24:52.449: htsp_process_event: [0/0/2, FXOLS_ONHOOK, E_HTSP_SETUP_REQ                                                                              ]fxols_onhook_setup

*Dec 28 01:24:52.449: [0/0/2] set signal state = 0xC timestamp = 0

*Dec 28 01:24:52.449: htsp_timer - 1300 msec

*Dec 28 01:24:52.701: htsp_process_event: [0/0/2, FXOLS_WAIT_DIAL_TONE, E_DSP_SI                                                                              G_1100]fxols_power_denial_detected

*Dec 28 01:24:52.701: htsp_timer2 - 1000 msec

*Dec 28 01:24:52.701: htsp_timer_stop

*Dec 28 01:24:53.701: htsp_process_event: [0/0/2, FXOLS_WAIT_DIAL_TONE, E_HTSP_E                                                                              VENT_TIMER2]fxols_power_den_disc

*Dec 28 01:24:53.701: htsp_timer_stop

*Dec 28 01:24:53.701: htsp_timer_stop2

*Dec 28 01:24:53.701: [0/0/2] set signal state = 0x4 timestamp = 0

*Dec 28 01:24:53.705: htsp_process_event: [0/0/2, FXOLS_ONHOOK, E_HTSP_RELEASE_R                                                                              EQ]fxols_onhook_release

*Dec 28 01:24:53.893: htsp_timer_stop3 htsp_setup_req

*Dec 28 01:24:53.897: htsp_process_event: [0/0/3, FXOLS_ONHOOK, E_HTSP_SETUP_REQ                                                                              ]fxols_onhook_setup

*Dec 28 01:24:53.897: [0/0/3] set signal state = 0xC timestamp = 0

*Dec 28 01:24:53.897: htsp_timer - 1300 msec

*Dec 28 01:24:54.149: htsp_process_event: [0/0/3, FXOLS_WAIT_DIAL_TONE, E_DSP_SI                                                                              G_1100]fxols_power_denial_detected

*Dec 28 01:24:54.149: htsp_timer2 - 1000 msec

*Dec 28 01:24:54.149: htsp_timer_stop

*Dec 28 01:24:55.149: htsp_process_event: [0/0/3, FXOLS_WAIT_DIAL_TONE, E_HTSP_E                                                                              VENT_TIMER2]fxols_power_den_disc

*Dec 28 01:24:55.149: htsp_timer_stop

*Dec 28 01:24:55.149: htsp_timer_stop2

*Dec 28 01:24:55.149: [0/0/3] set signal state = 0x4 timestamp = 0

*Dec 28 01:24:55.153: htsp_process_event: [0/0/3, FXOLS_ONHOOK, E_HTSP_RELEASE_R                                                                              EQ]fxols_onhook_release

*Dec 28 01:24:55.517: htsp_timer_stop3 htsp_setup_req

*Dec 28 01:24:55.517: htsp_process_event: [0/0/0, FXOLS_ONHOOK, E_HTSP_SETUP_REQ                                                                              ]fxols_onhook_setup

*Dec 28 01:24:55.517: [0/0/0] set signal state = 0xC timestamp = 0

*Dec 28 01:24:55.517: htsp_timer - 1300 msec

*Dec 28 01:24:55.773: htsp_process_event: [0/0/0, FXOLS_WAIT_DIAL_TONE, E_DSP_SI                                                                              G_1100]fxols_power_denial_detected

*Dec 28 01:24:55.773: htsp_timer2 - 1000 msec

*Dec 28 01:24:55.773: htsp_timer_stop

*Dec 28 01:24:56.773: htsp_process_event: [0/0/0, FXOLS_WAIT_DIAL_TONE, E_HTSP_E                                                                              VENT_TIMER2]fxols_power_den_disc

*Dec 28 01:24:56.773: htsp_timer_stop

*Dec 28 01:24:56.773: htsp_timer_stop2

*Dec 28 01:24:56.773: [0/0/0] set signal state = 0x4 timestamp = 0

*Dec 28 01:24:56.777: htsp_process_event: [0/0/0, FXOLS_ONHOOK, E_HTSP_RELEASE_R                                                                              EQ]fxols_onhook_release

Port is detecting a power denial

Can you try "no supervisory disconnect signal"

Hi Bevila,

The problem resolved due to the telco backend hardware issue which caused the outgoing call failed. Appreciate your advice and assistance. Thanks.

I'm having the exact same problem as the original poster.  I notice that this thread is very old, but perhaps someone could enlighten me to what is going on.

The only difference is that the following is what I use for my voice-ports:

trunk-group POTS-FXO

connection plar opx 2857

caller-id enable

wooiboontan, if possible, can you let me know what you did to fix it?

Hi Hyoun,

For my case the problem was not the CUE configuration issue and it was caused by the telco backend switching hardware faulty so after they have changed the equipment everything back to good.

I hope this helps.

Regards,

WB

WB,

Almost always it is the way the port is configured.  For an FXO using UVERSE line converted to analog and plugged into and FXO the following works:

2851-LAB(config)#voice-port 0/2/0
2851-LAB(config-voiceport)#supervisory disconnect dualtone mid-call
2851-LAB(config-voiceport)#no battery-reversal
2851-LAB(config-voiceport)#cptone CN
2851-LAB(config-voiceport)#timing hookflash-out 50

Or for the entire line of the port:

voice-port 0/2/0
 trunk-group Home 1
 supervisory disconnect dualtone mid-call
 no battery-reversal
 cptone CN
 timing hookflash-out 50
 connection plar opx 103
 description Home
 caller-id enable