OOB Wirless NAC Problem

Unanswered Question
Dec 23rd, 2009
User Badges:


I have a strange problem that I was wondering if anyone can shed any light on?

I have a 4400 WLC that is authenticating users against a Cisco 3310 Guest server. Once authenticated they are not being moved from the Authentication VLAN on the CAM.

I see the users created on the CAM. I see the Device identified on the CAM from the SNMP trap sent by the WLC. I see the radius accounting package sent from the CAS to the CAM and the user listed under active users on the CAS. However I never see any users listed on the CAM or indentified in the OOB users list?

I have Role mapping setup, but allthough I get successfully logged in, it would seem that the CAS/CAM does not recognise this and switch the user from auth VLAN to access VLAN. If I check the client status on the WLC I see all Authentication correct, just state set to Quaranteen.

I am going round in circles here.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion