Running 12.2(18)SXF16

vpdn command is not there. Should I be running a different version?

Could you provide us the output of show version?

Cisco Internetwork Operating System Software
IOS (tm) s222_rp Software (s222_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF16, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by cisco Systems, Inc.
Compiled Tue 03-Mar-09 14:13 by kellythw
Image text-base: 0x40101040, data-base: 0x42C7EAA0

ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1)
BOOTLDR: s222_rp Software (s222_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF16, RELEASE SOFTWARE (fc2)

WT01 uptime is 5 days, 21 hours, 26 minutes
Time since WT01 switched to active is 5 days, 21 hours, 25 minutes
System returned to ROM by  power cycle (SP by power-on)
System image file is "disk0:s222-adventerprisek9_wan-mz.122-18.SXF16.bin"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html you require further assistance please contact us by sending email to
export@cisco.com. WS-C6506 (R7000) processor (revision 3.0) with 458752K/65536K bytes of memory.
Processor board ID SAL0847642W
R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
1 FlexWAN controller (1 ATM)(1 Channelized T3).
2 Virtual Ethernet/IEEE 802.3 interfaces
10 Gigabit Ethernet/IEEE 802.3 interfaces
4 Serial network interfaces
1 ATM network interface
1 Channelized T3 port
381K bytes of non-volatile configuration memory.

If

cisco

32768K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102

Only these vpdn/ppoe commands are available for 12.2SX

clear vpdn tunnel pppoe (12.2SX)
debug vpdn pppoe-data (12.2SX)
debug vpdn pppoe-error (12.2SX)
debug vpdn pppoe-events (12.2SX)
debug vpdn pppoe-packet (12.2SX)
vpdn aaa attribute (12.2SX)

debug pppoe (12.2SX)
debug pppoe redundancy (12.2SX)

Here is an old link about this:

This feature is supported on the following platforms:

•Cisco 3600 series

•Cisco 4500 series

•Cisco 4700 series

•Cisco 6400 series

•Cisco 7500 series

•Cisco MC3810 series

•Cisco UBR 7200 series

http://www.cisco.com/en/US/docs/ios/12_1t/12_1t2/feature/guide/dtpppofe.html#wp1015343

Is there a way I can handoff pppoe sessions to an external server? L2TP?

I need to terminate 100 ATM PVCs on this router, or an external pppoe server.

Thanks,

I am new to MPLS, could this be benifical to me in this situation?

I also do not have to use pppoe, although I would prefer to.

Thanks to all !