12-28-2009 02:29 PM - edited 03-06-2019 09:05 AM
Hi,
In default mode the ASA 5505 is setup with two Vlan's, one inside and one outside. Vlan1 is the default inside VLan, with IP 192.168.1.1. I would like to change the subnet of Vlan1 tot 192.168.10.1, but when I do, no Ethernet port is assigned to Vlan1 anymore (was 0/1 - 0/7). What I have done is;
#config t
(config)#interface vlan 1
(config)#ip address 192.168.10.1 255.255.255.0
But after that, no Ethernet port is within Vlan1, so I tried the following to assign one (port 0/1);
#config t
(config)#interface 0/1
(config)#switchport access vlan 1
(config)#no shut
But nothing happends when monitoring (#show run) interface 0/1 (no Vlan assigned)
Please help!
12-28-2009 09:45 PM
Hi,
Check out the below links for configuratiion in ASA 5505 ,Hope this helps out your query !!
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/int5505.pdf
Regards
Ganesh.H
12-29-2009 09:48 AM
Well, I did not solve it....The problem is when the Inside (vlan1) IP has been modified I'm no longer able to connect to the ASA using ASDM. I found on the internet that is has something to do with an DHCP Pool assigned to Vlan1, but Im unable to remove this pool, I guess as a result of leak of knowledge....
Maybe someone can help why changing the default IP of the default Vlan causes this much trouble...Thanks in advance.
12-29-2009 01:11 PM
Well, solved it myself!
It's kind a drastic solution, but it worked. To configure an other default IP for Vlan 1, simply restore the ASA to it factory defaults with the following parameters;
Let's say we like to set Vlan1 to subnet 192.168.10.x instead of (the default) 192.168.1.x
(config)#configure factory-default 192.168.10.1 255.255.255.0
Jobs done, happy new year...
02-01-2010 02:51 PM
Excellent job stendec75 , I was searching for the same issue. I used ASDM to change my Vlan1 IP, but then, after the change, I lost all access to it through ASDM. By posting your own found solution to your problem, you helped me out a ton.
Thank you.
02-23-2012 06:08 AM
The reason why u lost ASDM connection is once you change the inside ip you have to allow the same ip for
http server enable
http 192.168.x.x 255.255.255.0 inside
If u do not do this the first ip will only be allowed and with the new ip which u given will not have access.
Sent from Cisco Technical Support iPad App
01-12-2017 12:03 PM
simple solution to issue... cheers!! thanks...
02-10-2012 10:56 PM
Hi,
There's no other way?
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: