Cisco Ethernet over Copper Solution

mlouis · ‎12-29-2009

Does Cisco have or plan to have a product that can compete directly with the Ethernet over Copper solutions from Actelis and Hatteras networks?

www.actelis.com

I have a project that I am working on where we are trying to work up a solution with Cisco products. I think the GHSDL is the only option that will work here in a back to back solution with a CO and CPE router on each end respectively.

Has anyone run into this?

Giuseppe Larosa · ‎12-29-2009

Hello,

we have tried to use LRE with C2950 LRE on one side and associated CPE on the other side to connect a remote side to a main office.

But we had not good results probably because the copper wires were not good.

Also we discovered we could not build etherchannel bundles using LRE ports.

see

http://www.cisco.com/en/US/products/hw/switches/ps605/index.html

using back to back GSDSL can be a solution to connect two small and near sites

https://www.cisco.com/en/US/tech/tk175/tk274/technologies_configuration_example09186a0080135834.shtml

Hope to help

Giuseppe