12-29-2009 12:31 PM - edited 03-04-2019 07:04 AM
Hello,
I've intalled two HWIC-1FE on a C2821 router. All 3 LED lights are on each card. However, the IOS does not see them...
Could you please help?
Thanks,
Frank
Solved! Go to Solution.
12-29-2009 12:41 PM
fntowo2009 wrote:
Hello,
I've intalled two HWIC-1FE on a C2821 router. All 3 LED lights are on each card. However, the IOS does not see them...
Could you please help?
Thanks,
Frank
Frank
Check the IOS version you are running with a "sh version". You need a minimum of 12.4(15)T - note it must be a T train release -
Jon
12-29-2009 12:47 PM
Frank
As you sh version shows you need to upgrade your IOS to a minimum of 12.4(15)T.
Jon
12-29-2009 12:33 PM
Please post sh version and sh diag output of the router. Thanks
12-29-2009 12:45 PM
12-29-2009 12:47 PM
Frank
As you sh version shows you need to upgrade your IOS to a minimum of 12.4(15)T.
Jon
12-29-2009 12:54 PM
Hi Jon,
Thanks for your help.
Doesn't my current IOS image support vlan config for HWIC-4ESW? The only option I get when entering the vlan command is accounting...
Thanks,
Frank
12-29-2009 01:00 PM
Frank
Have you seen my response in the other post ?
Jon
12-29-2009 01:36 PM
fntowo2009 wrote:
Hi Jon,
Thanks for your help.
Doesn't my current IOS image support vlan config for HWIC-4ESW? The only option I get when entering the vlan command is accounting...
Thanks,
Frank
Frank
Quick follow up. In the other thread i said it was
router# vlan-database
it's actually
router# vlan database
told you my memory was a bit suspect
http://www.cisco.com/en/US/docs/ios/lanswitch/command/reference/lsw_u1.html#wp1012545
Jon
12-29-2009 12:41 PM
fntowo2009 wrote:
Hello,
I've intalled two HWIC-1FE on a C2821 router. All 3 LED lights are on each card. However, the IOS does not see them...
Could you please help?
Thanks,
Frank
Frank
Check the IOS version you are running with a "sh version". You need a minimum of 12.4(15)T - note it must be a T train release -
Jon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: