Netflow configuration on a 7603. Please assist. Thanks

Unanswered Question
Dec 30th, 2009
User Badges:

I am attempting to configure my 7603 running (cat 6000 sup 2 blade) to send netflow information to Netflow server but un-succesfull.  Below is the config that I did. 


interface port-channel 1
!
ip route-cache flow
!
ip flow-export source port-channel 1
!
ip flow-export version 5
!
ip flow-export destination (server IP) 2055


The only option I have after configuring "ip route-cach flow" is "ip flow ingress"


Please assist in providing the correct configuration to send all netflow traffic to server.



Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
CSCO11167812 Wed, 12/30/2009 - 07:27
User Badges:

Hi,


Can you ping the destination address from the 7603.


And did you apply the ip flow ingress or ip flow egress command to the interface you want to capture



Michel

Giuseppe Larosa Wed, 12/30/2009 - 14:52
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello,


you probably need to use both commands

ip route-cache flow

ip flow ingress


on each L3 interface you want to monitor


you need also to verify that server is listening on UDP port 2055


see


http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/nde.html#wp1081901


there are variations for different IOS versions and hardware combinations


Hope to help

Giuseppe

Actions

This Discussion