Performance Routing option not available in Configuration Professional v2

Answered Question
Dec 30th, 2009

I'm getting a Cisco 2901 router set up and attempting load balancing/link aggregation and/or fail-over for my dual WAN connections. Being new to Cisco's IOS software, I would prefer to do my configuration using the Configuration Professionsal GUI.  As I understand, the Performance Routing option will help me set this up but I don't have that option available in Configuration Professional; any ideas? I downloaded the most recent version of CP (version 2) I believe; I've reviewed over the often referenced article on this feature at: Cisco Performance Routing and reviewed the Cisco Feature Navigator available at http://www.cisco.com/go/cfn for my IOS release; the feature I'm looking for is documented in a flash presentation at http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/scrcst/PfR/CCPPFR.swf (screenshot below):

Untitled.jpg

A summary of the key results of the IOS "show version" command on this router are:

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Wed 30-Sep-09 05:30 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M1, RELEASE SOFTWARE (fc1) BPRouter uptime is 5 days, 23 hours, 43 minutes System returned to ROM by power-on System restarted at 11:34:47 PCTime Wed Dec 23 2009 System image file is "flash0:c2900-universalk9-mz.SPA.150-1.M.bin"

Cisco CISCO2901/K9 (revision 1.0) with 483328K/40960K bytes of memory.

Processor board ID FTX134981A3

2 FastEthernet interfaces

2 Gigabit Ethernet interfaces

1 Virtual Private Network (VPN) Module

DRAM configuration is 64 bits wide with parity enabled.

255K bytes of non-volatile configuration memory.

254464K bytes of ATA System CompactFlash 0 (Read/Write)

License Info:

License UDI:

-------------------------------------------------

Device# PID SN

-------------------------------------------------

*0 CISCO2901/K9 FTX134981A3

Technology Package License Information for Module:'c2900'

----------------------------------------------------------------

Technology Technology-package Technology-package Current Type Next reboot

-----------------------------------------------------------------

ipbase ipbasek9 Permanent ipbasek9

security securityk9 Permanent securityk9 uc None None None data None None None Configuration register is 0x2102

I have this problem too.
0 votes
Correct Answer by cindy toy about 6 years 11 months ago

Thank you for your question.  This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product.  Please post your question in the Cisco NetPro forums located here: https://supportforums.cisco.com/community/netpro?view=overview This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.

Regards,

Cindy Toy

Cisco Small Business Support Community Manager

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
cindy toy Mon, 01/11/2010 - 09:12

Thank you for your question.  This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product.  Please post your question in the Cisco NetPro forums located here: https://supportforums.cisco.com/community/netpro?view=overview This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.

Regards,

Cindy Toy

Cisco Small Business Support Community Manager

Actions

This Discussion

Related Content