WLC: Block Client

colmgrier · ‎12-30-2009

How to block off a client from access point if sending too many requests on a WLC 4400.

George Stefanick · ‎12-30-2009

Monitor-->clients (right hand side)---> click on the blue box next to the problem client and press disable

enjoy!

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

Naveen Kumar · ‎04-09-2013

Hello,

Using this link you can configure the peer to peer blocking of clients:
http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_wlan.html#wp1161858

or you can use this method:
Monitor-->clients (right hand side)---> click on the blue box next to the problem client and press disable.

Leo Laohoo · ‎04-09-2013

Or you can try CLI.

Command: config exclusionlist add AA:BB:CC:DD:EE:FF "Comments"