problem when deploy QOS on 6509 & 7609

Unanswered Question
Dec 30th, 2009

I want to deploy QOS on two cisco 6509 stacking by vss to limit the transmit rate of some applications.but when i deploy the service-policy on an port-channel says "MQC features are not supported in output direction for this interface",there is a same problem when i deploy the same policy on an 7609.the ios version information of 6509 is "s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXI1",the ios version information of 7609 is "c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 12.2(33)SRD2",is there a command can solve the problem or should i update the ios ?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Giuseppe Larosa Thu, 12/31/2009 - 10:29

Hello Jiyuan,

post the policy-map configuration to see what actions are configured on it.

see egress QoS restrictions

Egress PFC QoS Interfaces

You can attach an output policy map to a Layer 3 interface (either a LAN port configured as a Layer 3 interface or a VLAN interface) to apply a policy map to egress traffic.

NoteOutput policies do not support microflow policing.

You cannot apply microflow policing to ARP traffic.

You cannot set a trust state in an output policy.

Hope to help


cockfly1987 Thu, 12/31/2009 - 18:33

Hi Giuseppe,

thanks for you help

police-map xxxx
class-map  xxxx
bandwidth percent 30
class-map  xxxx
bandwidth percent 20

class class-default

an example of my configuration,it seems that the 6509 & 7609 do not support the MQC,how can i slove this problem?

cockfly1987 Thu, 12/31/2009 - 20:51

thanks for you help,waiting for your reply

--- 10年1月1日,周五, giuslar 写道:

发件人: giuslar

主题: New message: "problem when deploy QOS on 6509 & 7609"

收件人: "Jiyuan Gong"

日期: 2010年1月1日,周五,上午2:30

Jiyuan Gong,

A new message was posted in the Discussion thread "problem when deploy QOS on 6509 & 7609":

Author  : giuslar

Profile :



This Discussion

Related Content