firmware upgrade using cucm7.0

Unanswered Question
Rob Huffman Sat, 01/02/2010 - 07:21

Hi Nareh,


You do not need to remove the "old" firmware files. Just load the new new

files and then change the Device defaults page in CUCM for only

the 7970 to reflect the newly named files;


This is done via OS Admin>Software Upgrades




Software Upgrades




--------------------------------------------------------------------------------




You can use the Software Upgrades options to perform the following types of installations and upgrades:




Install/Upgrade-Use this option to upgrade the application software, install Cisco Unified Communications Manager Locale Installers and dial plans, and upload and install device packs, phone firmware loads, and other COP files.




TFTP File Management-Use this option to upload various device files for use by the phones to the TFTP server. The TFTP server files that you can upload include custom phone rings, callback tones, and phone backgrounds.






http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/6_0_1/cucos/iptpch7.html




When using Cisco Unified CallManager Release 5.0 or later


For Cisco Unified CallManager 5.0, you must do all software installations and upgrades by using the Software Upgrades menu options. The system can upload and process only software that Cisco Systems approved. You cannot install or use third-party or Windows-based software applications that you may have been using with a previous version of Cisco Unified CallManager with Cisco Unified CallManager 5.0.




Using your web browser, login to the Cisco IPT Platform Administration web page




Under the Software Upgrades menu, select Install/Upgrade.




Fill in the appropriate values in the Software Location section for the file you downloaded above, and click Next.




In the Available Software drop-down box, select the file you downloaded above, and click Next.




After validating the MD5 has the correct value, click Next.




In the Warning box, verify you have selected the correct firmware, then click Install.




Check that you received a Success message.




http://www.cisco.com/web/software/282074289/17110/cmterm-7941_7961-sccp.8-3-5-readme.html






Hope this helps!


Rob

Actions

This Discussion