We are currently in a scenario where a Server (located on the server side) needs to access the VIP on the client side network. The VIP loadbalances to adjacent LDAP rservers and the regarding server needs to access this loadbalanced service. Is it correct that i need NAT (SNAT) the traffic from the accessing server to a dedicated IP in the client side vlan?
I made quick drawing which hopefully explains my question better.
Thanks for reading
if the destination ip address is a vip, the outgoing interface is not vlan 10 (where the vip address belongs) but vlan 192 where the rservers are located.
So, you will need a natpool in the rserver vlan 192 and modify your nat dynamic command to point at this natpool.