Access with telnet to router over isdn line

Answered Question
Jan 5th, 2010
User Badges:

Hi all,


Is it possible to configure access with telnet to a router over a isdn line.. for management...???


it is an Callmanager express, so normal the isdn line is in use for voice...


Thanks

Correct Answer by paolo bevilacqua about 7 years 3 months ago

As indicated before: "the voice BRI cards of cisco router do not support data"


In other words: Data BRI cards are different ones, and do not support voice.


Moreover: the rotuer that you have do not have an ISDN modem inside. these are sold seprately in modules of 6.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
paolo bevilacqua Tue, 01/05/2010 - 03:53
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

No, because the voice BRI interface do not support data connections.

kennis1977 Tue, 01/05/2010 - 05:38
User Badges:

Isdn does support data...however... is it also possible to support data and voice..?


so when a modem calls over the isdn line it gives access to the router with telnet.


because there is a command isdn incoming voice data and isdn incoming voice modem

Correct Answer
paolo bevilacqua Tue, 01/05/2010 - 05:46
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

As indicated before: "the voice BRI cards of cisco router do not support data"


In other words: Data BRI cards are different ones, and do not support voice.


Moreover: the rotuer that you have do not have an ISDN modem inside. these are sold seprately in modules of 6.

Actions

This Discussion