01-05-2010 01:04 AM - edited 03-15-2019 08:56 PM
Hi all,
Is it possible to configure access with telnet to a router over a isdn line.. for management...???
it is an Callmanager express, so normal the isdn line is in use for voice...
Thanks
Solved! Go to Solution.
01-05-2010 05:46 AM
As indicated before: "the voice BRI cards of cisco router do not support data"
In other words: Data BRI cards are different ones, and do not support voice.
Moreover: the rotuer that you have do not have an ISDN modem inside. these are sold seprately in modules of 6.
01-05-2010 03:53 AM
No, because the voice BRI interface do not support data connections.
01-05-2010 05:38 AM
Isdn does support data...however... is it also possible to support data and voice..?
so when a modem calls over the isdn line it gives access to the router with telnet.
because there is a command isdn incoming voice data and isdn incoming voice modem
01-05-2010 05:46 AM
As indicated before: "the voice BRI cards of cisco router do not support data"
In other words: Data BRI cards are different ones, and do not support voice.
Moreover: the rotuer that you have do not have an ISDN modem inside. these are sold seprately in modules of 6.
01-06-2010 05:24 AM
Ok...clear... thanks for your reply...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: