01-05-2010 05:40 AM - edited 03-21-2019 01:59 AM
Hi,
I've install a spa9000 solution with a gateway isdn mediatrix 4402 - point to point protocol. This installation works with 6 phones spa962 and a big ricoh copier for the fax on the analog port.
All seems to work good except the sending of fax.
Sometimes the fax is not send and i receive a "line error" report. It depend on the number i call.
Some numbers always work perfectly and others never work.
It seems to be a problem with the fax of the callee (for example: i call the same customer on two different numbers to test on 2 different fax machines and it works on the first and not on the other). When the problem occur, the transmit never start and the call is ended.
An idea of a config to solve this ?
01-05-2010 06:09 AM
Hi Patrice:
Are the two fax numbers similar? Are they connected through same line types?
Regards
Alberto
01-05-2010 07:33 AM
Hi, first, thx for that fast react !
The two faxes are different models on different numbers. For the type of lines i dont know.
Indeed i think that i have the problem only with some pstn lines (not all).
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: