Dynamic L2L spoke to spoke vpn

Unanswered Question
Jan 5th, 2010
User Badges:

So I have a cisco ASA acting as a hub, and 2 additional ASA connecting to it.

Problem is I have issue with the spokes accessing each other.  The issue is spoke A cannot access spoke B, but spoke B can access spoke A.  If spoke B initiates the connection first, like ping an ip on spoke A, thne afterwards Spoke A can access spoke B until a period of inactivity.

Both spokes have no issue access the hub.

The only error I get on the hub is the follow message below.

IKE Initiator unable to find policy; Intf outside, Src:, Dst:

Any help or pointers would be greatly appreciated.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Joe B Danford Wed, 01/06/2010 - 05:17
User Badges:
  • Cisco Employee,

Can you post your config? VPN portion and NAT statements?


This Discussion

Related Content