rate limiting or policing on catalyst 3750

Unanswered Question
Jan 6th, 2010
User Badges:

hi,

I want to limit traffic on output of my 3750 to the upper limit of my dsl connexion  ( 700 Kbps)

for making my own qos and not by the provider box,

but it appear that it is not possible to make this :


Policy Map police_case
    Class class-default
      police 600000 8000 exceed-action drop


case(config-if)#service-policy output  police_case
police command is not supported for this interface
Configuration failed!
Warning: Assigning a policy map to the output side of an interface not supported


Is there a solution to this?


ps :

my ios

c3750-advipservicesk9-mz.122-46.SE.bin

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Wed, 01/06/2010 - 07:58
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

fd_case17 wrote:


hi,

I want to limit traffic on output of my 3750 to the upper limit of my dsl connexion  ( 700 Kbps)

for making my own qos and not by the provider box,

but it appear that it is not possible to make this :


Policy Map police_case
    Class class-default
      police 600000 8000 exceed-action drop


case(config-if)#service-policy output  police_case
police command is not supported for this interface
Configuration failed!
Warning: Assigning a policy map to the output side of an interface not supported


Is there a solution to this?


ps :

my ios

c3750-advipservicesk9-mz.122-46.SE.bin


You need to use the "srr-queue bandwidth limit ..." command.  However you can only specify a percentage of the bandwidth from 10 to 90% so you won't be able to get as granular are 700Kbps -


3750 policing


Jon

sachinraja Wed, 01/06/2010 - 07:59
User Badges:
  • Red, 2250 points or more

Hi


Yes.. policing is not possible on the egress interface.. it  is supported only on ingress interface... on the egress you can use bandwidth limit, bandwidth shape or share configurations.. you need to define the queue lenghts, thresholds etc, and do bandwidth limit percentage based.. but do you realy need to do this? isnt it upto the ISP to shape traffic ? In any case , pls refer to this doc for more info ;


http://www.cisco.com/en/US/products/hw/switches/ps5023/products_tech_note09186a0080883f9e.shtml#topic3


Hope this helps.. all the best..


Raj

Actions

This Discussion