01-06-2010 11:15 PM - edited 03-11-2019 09:54 AM
Hello. I have a problem with a Cisco 2800 Router. I can't connect from the inside network to outside using a GRE VPN client (MS). I did a packet capture and responses are coming on the outside interface but they never reach the inside interface. I allowed both IP protocol 47 and TCP 1723. I've attached the running config. Please help.
Solved! Go to Solution.
01-07-2010 04:38 AM
01-07-2010 04:38 AM
i found this usefull:
01-07-2010 08:34 PM
hi ,
you would require that you open up GREon the outside interface.
access-list ex 199 permit gre any any
that should take care of it.
Faisal Bhura
01-07-2010 11:15 PM
It doesn't work with the acl only, but the method described in the link above with the inspection policy did the trick. Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide