Routing thru l2 switch

Unanswered Question
Jan 7th, 2010
User Badges:

hi all,


i have my Routers two interface configured on vlan 200 ip 10.80.8.2,


which are connected to me 3400  ,


inturn connected to a switch ip 192.168.1.35&then to server 192.168.1.201


i have tried giving routes for 192.168.1.35,192.168.1.0 coldnt get on

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ganesh Hariharan Thu, 01/07/2010 - 03:47
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Hi,


Is there a default route is configured in switch toward the router if not just configured a default route towards the router intreface and check.


Hope the helps out your query !!


Regards

Ganesh.H

Giuseppe Larosa Thu, 01/07/2010 - 03:57
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Cisco_blue,


or  the routers or the ME 3400 need to have a layer 3 interface in IP subnet 192.168.1.0, that  IP address can become the next-hop for default gateway on server and L2 switch. It is not enough to have a physical connection between L2 switch and the other devices.


Hope to help

Giuseppe

Actions

This Discussion