I've got our SPA525 phones working fine when connected via cable to the UC520 PoE ports.
I'm not sure however how to configure things so that I can connect PCs to the phones and still have normal network access.
Our configuration, from outside in:
1) ISP router
2) Cisco ASA5505 firewall
3) HP Switch connecting the whole network on 192.168.0.0/255.255.255.0, with some static IPs and the rest assigned by DHCP server.
Which port wouild I use to connect the UC520 to this network?
How do I configure the data VLAN (any any other required settings) so that it is connected to the main domain network?
Johannesburg, South Africa