cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1164
Views
0
Helpful
8
Replies

LMS 2.6, cannot start process syslogAnalyzer

rajesh_san
Level 1
Level 1

I'm unable to generate any syslog reports. an error is received when I see the collectot status

> Error

Collector Status is currently not available

Check Whether SyslogAnalyzer process is running normally

The following is the Analyzer status

    Process= SyslogAnalyzer
    State  = Administrator has shut down this server

The syslog.log file receives the logs. The syslogCollector log indicates the following error,

Could not send syslogs, removing the subscriber...Connection refused: connect

NMSROOT is C:/PROGRA~1/CSCOpx propFileC:/PROGRA~1/CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\C:\PROGRA~1\CSCOpx\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties

SyslogCollector - [Thread: main] INFO , 22 Dec 2009 15:20:00,046, Logging System Initialized.

SyslogCollector - [Thread: main] INFO , 22 Dec 2009 15:20:00,046, System Initialized.

SyslogCollector - [Thread: main] WARN , 22 Dec 2009 15:20:08,640, Unable to resurrect connection to a subscriber.

SyslogCollector - [Thread: main] INFO , 22 Dec 2009 15:20:08,718, Service started...

Resubscring the Analyzer to the collector doesn't solve the issue.

When enabling the analyzer process manually, it throws an error

"Error: cmd failed. Server reason:"

can anybody help in fixing this?

Thanks in advance

1 Accepted Solution

Accepted Solutions

Post a screenshot of your Services control panel showing all of the CiscoWorks services along with the output of the "hostname" command from a server DOS prompt.

View solution in original post

8 Replies 8

Joe Clarke
Cisco Employee
Cisco Employee

Post the entire SyslogCollector.log, AnalyzerDebug.log, SyslogAnalyzer.log, and output of the command:

netstat -a -n -o -b

Hi Joe, i've attached the files. But netstat command seems not to be taking

C:\>netstat -a -n -b -o

Displays protocol statistics and current TCP/IP network connections.

NETSTAT [-a] [-e] [-n] [-s] [-p proto] [-r] [interval]

Also, nothing was written to the AnalyzerDebug.log file.

Ah, you're on Windows 2000.  Post the output of "netstat -a -n" and the SyslogAnalyzer.log.

Hi Joe,

The outputs are included in the attachemetn outputs.zip poster earlier in reply.

Jrm is not working.  Post the jrm.log.

Please find attached the jrm.log. thanks

Post a screenshot of your Services control panel showing all of the CiscoWorks services along with the output of the "hostname" command from a server DOS prompt.

Hi Joe, Thanks for pointing it out. The service startup parameters were modified and after setting the same correctly, the jrm process came up and everything is fine now

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: