Multiple Links P-2-P

Answered Question
Jan 8th, 2010
User Badges:

Hi


I would shortly have Three sites connected with each other
Site_A connected to Site_B
Site_A connected to Site_C
Site_B connected to Site_C

All are connected via Wimax with Ethernet Interface 10/100 ( 6MB for each connection )

Is following OSPF config Ok in terms of redundancy and loop free
If one of the link goes down still there shoud be full reachability


Site_A connected to Site_B
Site_A : 192.168.1.1/30
Site_B : 192.168.1.2/30


Site_A connected to Site_C
Site_A : 192.168.1.4/30
Site_C : 192.168.1.5/30


Site_B connected to Site_C
Site_B : 192.168.1.7/30
Site_C : 192.168.1.8/30


SITE_A
router ospf 1
network 192.168.1.1 0.0.0.0  area 0
network 192.168.1.4 0.0.0.0  area 0
network 10.10.10.0 0.0.0.255 area 0


SITE_B
router ospf 1
network 192.168.1.2 0.0.0.0  area 0
network 192.168.1.7 0.0.0.0  area 0
network 10.10.20.0 0.0.0.255 area 0


SITE_C
router ospf 1
network 192.168.1.5 0.0.0.0  area 0
network 192.168.1.8 0.0.0.0  area 0
network 10.10.30.0 0.0.0.255 area 0

Correct Answer by Giuseppe Larosa about 7 years 6 months ago

Hello Saquib,


configuration is fine but IP addressing should be reviewed:

when using /30 subnets, each uses 4 addresses


192.168.1.0/30 - 192.168.1.0 base address, 192.168.1-2 usable addresses; 192.168.1.3 broadcast

192.168.1.4/30   192.168.1.4 base address, 192.168.5-6 usable addresses; 192.168.1.7 broadcast

192.168.1.8/30   192.168.1.8 base address, 192.168.9-10 usable addresses; 192.168.1.11 broadcast



hope to help

Giuseppe

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Giuseppe Larosa Fri, 01/08/2010 - 08:56
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Saquib,


configuration is fine but IP addressing should be reviewed:

when using /30 subnets, each uses 4 addresses


192.168.1.0/30 - 192.168.1.0 base address, 192.168.1-2 usable addresses; 192.168.1.3 broadcast

192.168.1.4/30   192.168.1.4 base address, 192.168.5-6 usable addresses; 192.168.1.7 broadcast

192.168.1.8/30   192.168.1.8 base address, 192.168.9-10 usable addresses; 192.168.1.11 broadcast



hope to help

Giuseppe

Actions

This Discussion